VXB Ball Bearings

 





  Home > Metric Bearings > 25mm inner diameter Bearings >

  30205 Taper roller Wheel Bearings 25x52x16.25
30205 Taper roller Wheel Bearings 25x52x16.25
30205 Taper roller Wheel Bearings 25x52x16.25


 
Our Price: $7.77
. Item: 30205 bearing
. Type: Taper roller Wheel Bearing
. Size: 25mm x 52mm x 16.25mm
. Quantity: One Bearing (cone+cup)
. Basic load ratings Cr: 31.5 KN

Stock Status:In Stock
Product Code: KIT7097
Qty:

Description
 

30205 Taper roller Wheel Bearing
One Bearing



30205 Taper roller Wheel Bearing, it ables to carry radial and axial load in one direction simultaneously (cone + cup), this is a popular size that could be used in many application that uses this size 25mm x 52mm x 16.25mm. Bearing is made of Chrome Steel.

  • Item: 30205 bearing
  • Type: Taper roller Wheel Bearing
  • Size: 25mm x 52mm x 16.25mm
  • Quantity: One Bearing (cone+cup)
  • Basic load ratings Cr: 31.5 KN
  • Basic load ratings Cor: 33.7 KN
  • Limiting Speed:
    • Grease Lubrication: 7,800 RPM
    • Oil Lubrication: 10,000 RPM

30205 Taper roller Wheel Bearings 25x52x16.25

Kit7097


Average Rating: 4.5 of 5 Total Reviews: 26 Write a review »

  0 of 0 people found the following review helpful:
 
I would buy again October 28, 2015
Reviewer: plowdog from New London, WI  
The bearings were used in a small trailer that is pulled by my motorcycle. Went over 4000 miles and did not have any problems. Looked locally for bearings no one carried this style. Would have to order. One bearing locally cost the same as two [...] through VXB.I was disappointed that the bearings are foreign made.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Performs as Advertised October 16, 2015
Reviewer: Boatguy  
Used on my boat trailer.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Excellent Service June 29, 2015
Reviewer: Bill  
Just as described for a reasonable price

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Appilcation for slow RMP only May 28, 2015
Reviewer: Mr. Fun  
Very affordable price ??.but ??.. these tapered roller bearings don't offer the quality that other brands charge for. These bearings most likely are low price because they are meant for slow speed appilcation like a pivot arm in a hydrolic application  where the rotation thru the bearing is very slow in surface speed  like earth moving equipment. I put these bearings in a grinder spindle that turns about 5 000 rpm and they are extreamely noisy. Most likely due to the rollers being different diameters  when bearings are assembled with different size balls or rollersthe smaller diamiter ones rattle around making noise inside the bearing. So ?..back to the "deep groove" Type motor bearings that came off the spindle in the first place.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great product fast shipping May 20, 2015
Reviewer: CP from Michigan  
Great product  will buy again.

Was this review helpful to you?

View All Customer Reviews