VXB Ball Bearings

 





  Home > Metric Miniature Bearings >

2x5 Shielded 2x5x2.3 Miniature Bearing Pack of 10
2x5 Shielded 2x5x2.3 Miniature Bearing Pack of 10


 
Our Price: $31.37
. Item: 2 x 5 x 2.3 Ball Bearings
. Type: Deep Groove Ball Bearings
. Closures: 2 Metal Shields
. Lubrication: Self Lubricated (Grease)
. Size: 2mm x 5mm x 2.3mm

Stock Status:In Stock
Product Code: KIT747
Qty:

Description
 
2 x 5 x 2.3 Shielded Ball Bearings
Lot of 10 Bearings


"10
"10

2 x 5 x 2.3 Shielded Ball Bearings, Bearings are made of Chrome Steel, each bearing has 2 Metal Shield to protect the bearing from dust or any possible contamination, also bearings are pre-lubricated with grease.

  • Item: 2 x 5 x 2.3 Ball Bearings
  • Type: Deep Groove Ball Bearings
  • Closures: 2 Metal Shields
  • Lubrication: Self Lubricated (Grease)
  • Size: 2mm x 5mm x 2.3mm
  • Inner Diameter: 2mm
  • Outer Diameter: 5mm
  • Width: 2.3mm
  • Quantity: 10 Bearings
  • Dynamic load rating Cr: 190 N
  • Static load rating Cor: 60 N
  • Limiting Speed:
    • Grease Lubrication: 98,000 RPM
  • Packing: 10 bearings in One plastic tube
  • KOYO: W682ZZX
  • NSK: 682ZZ
  • NMB: L-520ZZ

2x5 Shielded 2x5x2.3 Miniature Bearing Pack of 10


Kit747


Average Rating: 4.5 of 5 Total Reviews: 5 Write a review »

  0 of 0 people found the following review helpful:
 
parrot ar drone February 1, 2015
Reviewer: BoBo from Ventura, CA  
Fits the parrot ar drone.  I replaced the stock ones.  Seems to work w  The stock ones bent on me .... hopefully these will work better.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Works Great March 9, 2012
Reviewer: Frank from West Seneca from West Seneca, NY  
Bearings made a marked improvement in the AR Drones performance

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great handling of product January 30, 2012
Reviewer: Larry  
Hard to find minature bearing size for use on an AR.DRONE quadracopter.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Great upgrade bearings for AR. Drone January 24, 2012
Reviewer: Aerospacer from BigLake, Mn  
Although 0.3 mm wider than the prop shaft bushings they replace they work just as well as a narrower open ball bearing some others offer. The 10-pack is two more than needed but for the price  they make good spares.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
AR Drone Bearing Replacement May 27, 2011
Reviewer: Robert from Cleveland, OH  
These bearings will replace the AR Drone brass bearings with no modifications as required with some other replacement bearings.  The result is a prop assembly with less slop then original.  I think the Drone runs quieter with these bearings.

Was this review helpful to you?