VXB Ball Bearings

 





  Home > Bearings for Hobby > RC Cars & Trucks Ball Bearings > COX Bearings >

  10 Slot Car Flanged Shielded Bearing 1/8"x1/4" inch Miniature Bearings
10 Slot Car Flanged Shielded Bearing 1/8"x1/4" inch Miniature Bearings


 
Our Price: $47.37
. Item: 1/8" Slot Car Axle Flanged Shielded Ball Bearings
. Type: Flanged Deep Groove Ball Bearings
. Closures: 2 Metal Shields
. Lubrication: Self Lubricated (Grease)
. Dimensions: 1/8" x 1/4" English Size

Stock Status:(Out of Stock)
Product Code: SCB1-8
Qty:

Description
 
1/8" Slot Car Axle Flanged Shielded Ball Bearings
Lot of 10 Bearings


10 Slot Car Flanged Bearing 1/8"x1/4" Shielded:vxb:Ball Bearings
1/8" Slot Car Axle Flanged Shielded Ball Bearings, size is 1/8" x 1/4", bearings are made from Chrome Steel, each bearing has 2 metal shields to protect the bearing from dust or any possible contamination, also bearings are pre-lubricated with grease.

  • Item: 1/8" Slot Car Axle Flanged Shielded Ball Bearings
  • Type: Flanged Deep Groove Ball Bearings
  • Closures: 2 Metal Shields
  • Lubrication: Self Lubricated (Grease)
  • Dimensions: 1/8" x 1/4" English Size
  • Bearing Inner Diameter: 1/8" inch
  • Bearing Outer Diameter: 1/4" inch
  • Quantity: 10 Bearings
  • Dynamic load rating: 64 LBS
  • Static load rating: 22 LBS
  • Packing: 10 bearings in One plastic tube

Average Rating: 5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
good product December 9, 2012
Reviewer: metalsun from Sun City, CA.  
Bearings are exactly 1 8" in dia. so wouldn't fit on my 1 8" rods without some fine work.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Racing With VXB Bearings November 3, 2012
Reviewer: Bill from Weymouth, MA  
I used these bearings to replace the bronze bushings in the trigger in the controller I use for HO slot car racing. These bearings provided a nice  tight fit with no 'play' or sloppiness as well as very smooth and resistance free travel in the trigger. One of the benefits of using these bearings is that they are a direct fit with no modifications needed to use them in this application.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Low Cost Bearing August 1, 2011
Reviewer: Tom L from San Jose, CA  
Good robust 1 4 OD  1 8" ID Flanged bearing for electronic mechanism with low load.

Was this review helpful to you?