VXB Ball Bearings

 





  Home > Bearings for Hobby > RC Cars & Trucks Ball Bearings > Duratrax Bearings >

  10 Shielded Bearing R1810ZZ 5/16"x1/2"x5/32" inch Miniature Bearings
10 Shielded Bearing R1810ZZ 5/16"x1/2"x5/32" inch Miniature Bearings


 
Our Price: $24.95
. Item: R1810ZZ Ball Bearings
. Type: Deep Groove Ball Bearings
. Dimensions: 5/16" inch x 1/2" inch x 5/32" inch English Size
. Bearing Inner Diameter: 5/16" inch
. Bearing Outer Diameter: 1/2" inch

Stock Status:In Stock
Product Code: R1810ZZ
Qty:

Description
 
R1810ZZ Shielded Ball Bearings
5/16" x 1/2" x 5/32" inch
10 Bearings


10 Bearing R1810ZZ 5/16"x1/2"x5/32" Shielded:vxb:Ball Bearings
R1810ZZ Shielded Ball Bearings, Bearing inner diameter is 5/16" Inch, Bearing outer diameter is 1/2" Inch and Bearing width is 5/32" Inch, each bearing has 2 metal shields to protect the bearing from dust or any possible contamination, also bearings are pre-lubricated with grease.

  • Item: R1810ZZ Ball Bearings
  • Type: Deep Groove Ball Bearings
  • Dimensions: 5/16" inch x 1/2" inch x 5/32" inch English Size
  • Bearing Inner Diameter: 5/16" inch
  • Bearing Outer Diameter: 1/2" inch
  • Bearing Width: 5/32" inch
  • Size: 7.9375mm x 12.70mm x 3.9675mm
  • Closures: 2 Metal Shields
  • Lubrication: Self Lubricated (Grease)
  • Quantity: 10 Bearings
  • Dynamic load rating Cr: 0.57 KN
  • Static load rating Cor: 0.3 KN
  • Limiting Speed:
    • Grease Lubrication: 47,000 RPM
  • Equal: R1810-2Z &R1810-ZZ

Average Rating: 4.5 of 5 Total Reviews: 3 Write a review »

  0 of 0 people found the following review helpful:
 
I ordered from VXB before I will again. May 11, 2011
Reviewer: Panelmaker  
I used my order to replace bearings in a small fan.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
R1810ZZ sweet! March 14, 2011
Reviewer: FSG Machine Works from Fresno, CA  
I used these bearings in a shake testing instrument. They run quietly and are rugged enough to take a good deal of shock without damage. The small size makes them easy to integrate into compact assemblies.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
I expect to keep using these. October 31, 2010
Reviewer: DBT from Chesapeake, VA  
These little bearings do a great job for me. I use them as con-rod bearings on a small (1 3 hp) steam engine  stacking them three wide and they hold up better than I expected. I'm getting around 40 50 hrs out of them depending on load rpm's.

Was this review helpful to you?