VXB Ball Bearings

 





  Home > Bearings for Hobby > RC Cars & Trucks Ball Bearings > Duratrax Bearings >

10 R168ZZ Shielded Bearing 1/4"x3/8"x1/8" inch Miniature
10 R168ZZ Shielded Bearing 1/4"x3/8"x1/8" inch Miniature


 
Our Price: $24.95
. Item: R168ZZ Double Shielded Ball Bearings
. Type: Deep groove ball bearings
. Closures: 2 Metal Shields
. Lubrication: Self Lubricated (Grease)
. Dimensions: 1/4" inch x 3/8" inch x 1/8" inch English Size

Stock Status:In Stock
Product Code: R168ZZ
Qty:

Description
 

R168ZZ Ball Bearings
1/4" x 3/8" x 1/8"
10 Bearings

10 Bearing R168ZZ 1/4"x3/8"x1/8" Shielded:vxb:Ball Bearing
10 Bearing R168ZZ 1/4"x3/8"x1/8" Shielded:vxb:Ball Bearings
10 R168ZZ Shielded Ball Bearings, the inner diameter is 1/4", outer diameter is 3/8" and the width is 1/8", this is a popular size that could be used in many applications, each bearing has 2 metal shields to protect the bearing from dust or any possible contamination, also bearings are pre-lubricated with grease.

  • Item: R168ZZ Double Shielded Ball Bearings
  • Type: Deep groove ball bearings
  • Closures: 2 Metal Shields
  • Lubrication: Self Lubricated (Grease)
  • Dimensions: 1/4" inch x 3/8" inch x 1/8" inch English Size
  • ID (inner diameter)/Bore: 1/4" inch
  • OD (outer diameter): 3/8" inch
  • Width/Height/thickness: 1/8"inch
  • Size: 1/4" x 3/8" x 1/8"
  • Size: 6.350mm x 9.525mm x 3.175mm
  • Equal: R168-ZZ &R168-2Z
  • Quantity: 10 Bearings
  • Dynamic load rating Cr: 0.50 N
  • Static load rating Cor: 0.22 N
  • Limiting Speed:
    • Grease Lubrication: 53,000 RPM
  • Fits: Tamiya, Kyosho
  • FITS: COMPOSIT CRAFT LYNX SUPER SPEEDWAY (3-16 FRONT AXLE)
  • FITS: COMPOSIT CRAFT LYNX SUPER SPEEDWAY (1:8) FONT AXLE
  • FITS: CORALLY PRO 10 (1:12) FORMULA 1 SLIP DIFF
  • FITS: CORALLY SP10
  • FITS: CORALLY SP12

10 R168ZZ Shielded Bearing 1/4"x3/8"x1/8" inch Miniature

R168ZZ


Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
miniature bearings December 26, 2015
Reviewer: sam from Florida  
I made a balancing jig for my gasoline powered flying model airplane.

Was this review helpful to you?